(zanen majalisa)
Shigar dogo na jagora
1. Abubuwan da ake buƙata (Shirya kayan aikin shigarwa) kamar yadda aka nuna a adadi 1
(1) Mai mulki
(2) Matsayin shigarwa ta atomatik
(3) Bakin tallafi
Hoto 1
2. umarnin shigarwa
(1).Bukatar nemo ƙasa mai wuya wanda zai iya ɗaukar injin gabaɗaya.
(2) Sanya rails daban-daban daidai da haɗin kai zuwa (M10 Bolts) A matsayin adadi2, haɗa duka layin dogo da kyau.
(3) .The size of jagora dogo cibiyar3368mm (3368/25.4=132.6〞) .as Figure3.Wannan jagoran dogo nauyi ne 24Kg/m, dogo nisa 40mm, tsakiyar size: jagora dogo cibiyar don shiryar da dogo cibiyar.
(4) Domin kare iyakar iyakar dogo, buƙatar ja da diagonal (siffa 4), Tabbatar da girman diagonal, da dai sauransu tsawon mita 4.)
Hoto 2
Hoto 3
Hoto 4
(5).Yi amfani da kayan aikin da aka shirya azaman Hoto5
Sanya matakin shigarwa ta atomatik da goyan baya tsakanin ginshiƙan ɓangarorin biyu(nisa. Tsawon)
(a).Sanya mai mulki a kan rails (raba zuwa maki da yawa), tabbatar da duk tsayin maki akai-akai (kewayon 0.3mm), daidaita M14nut azaman adadi6 (wannan shine daidaitawa).
(b) Yi amfani da gradienter (akwai kumfa a ciki), don Bincika ko akwai babba da ƙasa a ɓangarorin biyu na layin jagora (kafin isar da mu gyara kaɗan), idan har yanzu suna da matsaloli, buƙatar daidaitawa kaɗan, adadi7.
(6).Shigar mai haɗa M10as Figure8.
(7).Shigar da kullin anga a ƙasa (kowane sashi na goyan baya), kamar adadi9
Hoto 5
Hoto 6
Hoto 7
Hoto 8
Hoto 9
An shigar da layin jagora gaba daya.
2.Machine shugaban shigarwa
1.An cire cakin injin, kamar yadda Figure10
Hoto 10
2.Don daidaita hagu.dama bearings zuwa matsakaicin
(gefen mu yana da jujjuyawar daidaitacce, a ciki akwai ɗaukar nauyi) kamar adadi11.
Hoto 11
3. Sanya kan inji akan ginshiƙan dogo da aka shigar, sanya ƙafar katako na hagu da dama na tsayin tsayin tsayi da gefen layin dogo (ƙara a ciki) jeri.
4. Sanya hagu.dama ɓangarorin biyu na iya kasancewa kusa da layin jagora.
Injikaiya shigar gaba daya!
3.Ground inji ta Daidaita diagonal.
1. Sanya fensir layi akan fitilar yankan harshen wuta.
2. Manna takardun A4 guda huɗu a kan farantin karfe, nisan takardun kamar mita biyu.
3. Zane mai motsi”十“Tsarin kan takaddun layi guda huɗu, akan takardar layin dama zana layin layi mai tsayi mai tsayi, sannan a matsa kan takardar layin hagu, zana layin kwance.,sannan a zana layi a tsaye, form”十” tsarin, ci gaba da matsawa ƙasa, a kan ƙananan takarda zana layi a tsaye, sa'an nan kuma zana layi a kwance, sa'an nan kuma a kan madaidaiciyar hanya zuwa dama, don haka, samar da tsarin rectangle, fadin 2meters, tsawon 3.5meters.
4. Auna tsayin diagonal guda biyu, duba ko daidai ne a tsakanin su, idan ba haka ba, yana nufin ba a sanya katakon giciye na na'ura da kyau ba, buƙatar daidaita diagonal.Duba milimita nawa tsakanin su, sarrafa kuskuren al'ada a cikin 0.5mm. Idan kurakurai suna da yawa. babba, da fatan za a daidaita kamar haka:
1) Cire harsashi na bangarorin biyu a matsayin adadi12.
2) Sake ƙwayayen M10 guda huɗu, kamar adadi13.
3) Kawai buƙatar ƙara 2 kwance kwayoyi.
Hoto 12
Hoto 13
Yanzu daidaita girman diagonal ya cika!
Lokacin aikawa: Maris-07-2022